SIHOPROTECTIVE FILM & TAPE Tell us what you need →

Flame retardant double sided tape

What happens when heat or flame reaches the tape?

A battery part or interior trim can look firmly bonded on day one. The harder question is whether the tape belongs in a flame-retardant design. SIHO's current factory brochure describes this family as up to UL94-V0.

Describe the part you need to bond

Sample free · buyer pays freight · exact grade and report confirmed before supply

SIHO factory brochure section for flame retardant double sided tape

The short answer

Do not ask one adhesive layer to quietly become the weak link.

Bond the partDouble-sided construction holds two surfaces together.
Check flame behaviourThe brochure describes the family as up to UL94-V0, halogen-free, low-smoke and non-dripping.
Confirm the exact gradeThe report, construction and test method must match the tape you will actually buy.

Where the brochure places it

Four jobs where “it sticks” is not the only question

01

Lithium battery bonding

Tell us the part, the substrate and where it sits in the battery assembly.

02

Automotive interiors

Bonding trim or interior parts while keeping the flame-retardant requirement visible.

03

Wire wrapping

Confirm whether the job is wrapping, fixing or insulation; they are not the same claim.

04

Internal fixing

The brochure also lists air-conditioning internal fixing and fire-retardant use.

Proof first, promise second

What the current factory brochure supports

Verified product-family statements

  • Flame-retardant grade described as up to UL94-V0.
  • Described as halogen-free, low-smoke, non-dripping and strongly adhesive.
  • Applications listed: lithium battery bonding, automotive interior bonding, wire wrapping and air-conditioning internal fixing.
  • The brochure table includes a flame-retardant tissue double-sided tape construction.

Not claimed without grade-specific evidence

No invented engineering numbers: this page does not claim dielectric strength, voltage rating, operating temperature, electrolyte resistance, thermal-runaway protection, OEM approval, RoHS or REACH.

Send the application and required standard first. Then SIHO can confirm the exact grade, sample and supporting report.

Thickness0.10 ± 0.01 mm
Adhesion to mirror steel≥10 N/25 mm
Initial tack≥20
Holding power≥15 hr

Values above are transcribed from the current brochure table. Confirm the exact test method and grade before purchase.

Make the sample answer a real question

Three steps before we cut the roll

Step 1Show the two surfaces

Battery material, plastic trim, wire covering, metal or another substrate?

Step 2Name the required standard

Is UL94-V0 a design target, a supplier requirement or a report you must submit?

Step 3Describe converting

Roll width, slit width, die-cut shape, liner and assembly method.

Questions buyers ask

Quick answers before the sample

Is flame retardant tape the same as insulation tape?

No. Flame behaviour and electrical insulation are different requirements. This page does not claim dielectric strength or voltage rating.

Can it be used in a lithium battery?

The brochure lists lithium battery bonding. The exact location, substrate, temperature, flame-retardant grade and required report still need confirmation.

Does every grade have UL94-V0?

Do not assume that. The brochure says the family reaches up to UL94-V0. Confirm the exact construction and supporting report before supply.

Can you supply custom die-cut parts?

Send the drawing, dimensions, liner and assembly method. SIHO can then confirm whether slitting or die-cut converting is suitable for the chosen grade.

Start with the real part

Send the substrate, flame-retardant requirement and drawing.

Daodao will turn that information into a sample question the factory can actually answer.

Ask Daodao for a sample