These are the five kinds of product customers most often bring to us. Find the one that matches yours.
These are the five kinds of product customers most often bring to us. Find the one that matches yours.
Film protects electronic products during production and processing, and keeps protecting them through shipping.
Silicone PET film · tack as low as ≤1.5 gf/25mm
About silicone PET film
A layer of film protects the surface of sheet and housings. The film is soft and conforms, so even irregular parts are covered.
PE protective film · blue or clear, tack from 1–3 to 1000 gf/25mm
About PE protective film
Tape goes over the gold fingers first. After wave soldering, the solder pot or tin spray, it peels off with no residue.
Polyimide tape · no residue after 260 °C for 1 minute (in-house test)
See this scenario
During high-temperature painting, tape covers the areas that must stay unpainted. After baking it peels off with no residue.
Green polyester tape · no residue after 200 °C for 30 minutes (data sheet)
See this scenario
You buy the roll, make die-cut parts and sell them on. We coat up to 1,600 mm wide and slit to the width you need.
Silicone and acrylic PET film, PE film, double-sided tape
See this scenarioIf you have a film you use now, send me a piece — we'll test it first, then match it and aim to do better. I'll reply within 24 hours: leave me a message with the button below, or email me directly.
Email: daodao@siliconefilmtape.com
Samples are free; you cover the freight. Add the details from step 1 if you know them; if not, just send us a piece of the film you use now.
Request a free sample →
Daodao Your contact
