PET double-sided: takes the pull
PET film carrier with pressure-sensitive adhesive on both sides, and good tensile strength. Bonds and holds metal, glass, plastic sheet and foam.
Double-sided tape, strong bond, steady hold.
Three carriers — PET film, tissue and PET mesh — plus AB tape. 0.03 to 0.15 mm thick, with peel, tack and holding power all on the spec sheet.
- 0.03–0.15 mm
- Thickness (spec sheet)
- ≥8 to ≥20 N/25mm
- Peel on SUS304 mirror steel (spec sheet)
- ≥15 to ≥24 hours
- Holding power (spec sheet)
Different carriers, different strengths.
For every grade, the spec sheet gives a minimum for peel, tack and holding power.
Tissue double-sided: conforms well
Tissue carrier that conforms well to the surface. Used for stamped nameplates, and for fixing parts inside laptops and phones.
Carrier-free: clear, no residue
No carrier — just a layer of adhesive. High adhesion, no residue, no lifting at the edges, clear, and it stands up to heat and weather.
Want the numbers? Open the spec table (thickness, peel, tack, holding power, roll width)
| Grade | Type | Thickness (mm) | Peel on steel (N/25mm) | Tack (#) | Holding power (h) | Roll width (mm) |
|---|---|---|---|---|---|---|
| SH-1001S | PET double-sided | 0.050±0.01 | ≥8 | ≥20 | ≥15 | 1020 |
| SH-1004S | PET double-sided | 0.03±0.01 | ≥10 | ≥20 | ≥15 | 1250 |
| SH-1003S | PET double-sided | 0.10±0.01 | ≥15 | ≥20 | ≥15 | 1020 |
| SH-1002S | PET double-sided | 0.15±0.015 | ≥15 | ≥20 | ≥15 | 1020 |
| SH-3003S | Tissue double-sided | 0.12±0.01 | ≥20 | ≥20 | ≥20 | 1020 |
| SH-3004S | Tissue double-sided | 0.14±0.01 | ≥20 | ≥20 | ≥24 | 1020 |
| SH-7001S | PET mesh double-sided | 0.07±0.01 | ≥8 | ≥20 | ≥15 | 1250 |
| SH-012H8 | Black AB double-sided (silicone / acrylic) | 0.050±0.01 | ≥10/≥15 | ≥20 | ≥15 | 1020 |
These are the values on our spec sheet, all given as minimums. Peel is measured on SUS304 mirror-finish steel; for the AB tape, the first figure is the silicone side and the second the acrylic side. Tack is given as a rolling-ball number (#). The sheet doesn't state peel angle or speed — tell me if you need them and we'll confirm and send them to you. Rolls are slit to the width you need.
Nameplates and signs, insulation, thermal and acoustic materials — it bonds them all.
Where something has to come off and go back on, use AB tape: acrylic on one side holds firm, silicone on the other holds lightly and can be lifted many times.
Nameplates and signs
Metal and plastic nameplates and signs: tape on the back, peel the release paper, and stick it on.
Request a free sample
Insulation, thermal and acoustic materials
Foam and similar materials: tape on the back, then bond it where it needs to go.
Request a free sampleWhat are you bonding? Tell me, and I'll pick the grade.
“What material, and what does it go onto? How thick, how much peel strength, and does one side need to lift off and re-stick? Tell me whatever you know.”
If you have a tape you use now, send us a piece — we'll test it first, then match it and aim to do better. I'll reply within 24 hours: leave me a message with the button below, or email me directly.
Email: daodao@siliconefilmtape.com
Daodao Your contact
Want to try a sample? Send it today, hear back within 24 hours.
Samples are free; you cover the freight.
Request a free sample →
Daodao Your contact